Brakni Oumaima, Hadj Arab Belaid, Kerkoub Youcef, Kerboua Ziari Yasmina, Numerical study of a non-Newtonian fluid flow of pseudo –plastic type through an abrupt contraction, International Congress of Energies and Engineering of Industrial Processes CEGPI’22 Algiers, Algeria 23-25 May 2022.
Brakni Oumaima, Kerkoub Youcef, Kerboua Ziari Yasmina, Optimization of the parallel flow field of a PEM fuel cell, International Congress of Energies and Engineering of Industrial Processes CEGPI’22 Algiers, Algeria 23-25 May 2022.
A. Bekhti, N. Bendjerrat, A. Mihoub, et al., “Power generation prediction of a savonius wind turbine using cfd investigation,” in The first International Conference on Physics of Semiconductor Devices, Renewable Energies and Environment, Bechar, Algeria, 2022
A. Bekhti, A. Boudis, S. Laazab, et al., “Effect of twist angle on hawt performances: Case of the nrel phase ii,” in The International Conference on Applied Sciences and Engineering, ICASE2022, Oran, Algeria, 2022.
A. Bekhti, M. Debbache, A. Boudis, and M. Tata, “Analyse aérodynamique d’une éolienne à axe vertical,” in 2ieme Séminaire International en Génie Industriel et Mathématiques Appliquées, ISIEAM, Skikda, Algérie, 2022.
A. Bekhti, D. Hamane, M. Maizi, M. Tata, A. Boudis, and M. Dey, “Nternational conference on advanced renewable energy systems,” in International Conference on Advanced Renewable Energy Systems, ICARES’22, Tipaza, Algeria, 2022.
M. Tata, M. Maizi, A. Bekhti, et al., “Small horizontal axis wind turbine,” in The first International Seminar on Materials Synthesis and Environmental Monitoring, ISMSEM, Ouargla, Algeria, 2022.
Y. Z. Bouzouaoui, F. Mokhtari, S. Zermout and I. Lasloudji, Computational study on the crystal growth of transparent crystal grown from an oxide melt», IC-SEAM’21 April 21-22, 2021, Ouargla, ALGERIA.
Y. Z. Bouzouaoui, F. HADDAD, S. Zermout, Chayeb Draa Azeddine, I. Lasloudji and F. MOKHTARI, Computation of thermal stresses in a DS multi crystalline silicon ingot”, CNPMA’2021, 27 et 28 Novembre 2021, USTHB, Alger, Algérie.
Y.Z. Bouzouaoui et al. 2nd IKZ Winter School Synergy of Experimental and Numerical Studies For Crystal Growth of Bulk Semiconductors Lecture”, 30 Novembre-02 Décembre 2020, Berlin, Allemagne.
Dadda B., Babbou A., Zarrit R., Bouhadda Y., Abboudi S. (2020) A Comparison Between Two Hydrogen Injection Modes in a Metal Hydride Reactor. In: Khellaf A. (eds) Advances in Renewable Hydrogen and Other Sustainable Energy Carriers. Springer Proceedings in Energy. Springer, Singapore.
D.E. GHERSI, M. AMOURA, K. LOUBAR, U. DESIDERI. “Energy and environmental evaluation of combinedcooling, heating and power production systems in Algeria” ICMEMIS, Djelfa, Juin 2019.
Y. Hamnoune et al., Gravity effect on Taylor DEAN FLOW IN CONICAL SYSTEM, Topical Problems of Fluid Mechanics 2018 à Praha, Czech Rupublic.
F.Haddad, F.Mokhtari, A.Benzaoui. 3D numerical Study of buoyancy effect on oxide melt in HEM crucible for High Rayleigh Numbers, ECCG6 Sixth European Conference on Crystal Growth, Bulgary, 2018.
Y. Hamnoune et al. CONCENTRATION AND GRAVITY EFFECT ON THE TAYLOR -DEAN FLOW BETWEEN TWO HORIZONTAL ROTATING COAXIAL CONES, Topical Problems of Fluid Mechanics 2018 à Praha, Czech Rupublic.
Kersani M. et al., Damage assessment using clustered acoustic emission signals in flax/epoxy quasi unidirectional woven laminates, The 10th European Solid Mechanics Conference ESMC(2018) Bologna, Italy.
A. Boudis, A. C. Bayeul-Lainé, A. Benzaoui, H. Oualli, and O. Guerri, “Numerical investigation of the effect of motion trajectory on the vortex shedding process behind a flapping airfoil,” in 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, USA, Dec. 2017.
D.E. GHERSI, M. AMOURA. “Effets du couplage de l’injection de la vapeur d’eau et du refroidissement intermédiaire sur les performances des turbines à gaz” SFT, Marseille, Juin 2017.
S.Bouarab, F.Mokhtari, S.Kaddeche, A.Hamrani, A.Merah. Résolution d’un problème de convection naturelle en 2D et 3D par la méthode spectrale et la méthode des différences finies, 23ème Congrès Français de Mécanique, Lille, France. 2017.
Y. Hamnoune, OCCURRENCE OF TAYLOR-DEAN INSTABILITY IN FLOW BETWEEN HORIZONTAL COAXIAL ROTATING CONES, Topical Problems of Fluid Mechanics 2017 à Praha, Czech Rupublic.
Three–dimensional modelling of laser cutting with inert assisting gas, T. Tamsaout , E.H. Amara and A. Bouabdallah, Conference on Laser Ablation COLA’2017, 3-8 September 2017 Marseille, France.
A. Boudis, A. Benzaoui, H. Oualli, O. Guerri, and M. Mekadem, “Investigation Numérique de L’Extraction de L’Energie par une Aile Oscillante,” in The 4th International Seminar on New and Renewable Energies,SIENR, Ghardaïa – Algeria, 2016.
Z.Tigrine, A.Bouabdallah, F.Mokhtari, A.Lalaoua “Aspect ratio effect on MHD liquid metal flow with passive mechanism control”.PAMIR International Conference on Fundamental and Applied MHD, Italy. 2016.
A.Merah, F.Mokhtari, A. Bouabdallah, “CFD study of flow in small geometries for a conical Couette-Taylor problem”. 8th European postgraduate fluid dynamics conference EPFDC16, Warsaw, Poland, 2016.
F.Mokhtari, A.Merah, A.Bouabdallah, Transient growth of vorticies in Czochralski growth, 7th International Symposium on Optical Materials (IS-OM7) Lyon. 2016.
I.Lasloudji, F.Mokhtari, A.Nehari, R.Boussaa, K.Lebbou, Numerical study of the growth of Langatate (La3Ga5.5Ta0.5O14 ) single crystals by Czochralski method, 7th International Symposium on Optical Materials (IS-OM7) Lyon, 2016.
S.Zermout, F.Mokhtari, A.Merah, F.Haddad, I.Lasloudji, R.Boussaa, Transient computation on Kyropoulos crystal growth of Sapphire, 7th International Symposium on Optical Materials (IS-OM7) Lyon, 2016.
Y. Hamnounoune et al. Gravity effect on the Taylor-Dean between two horizontal rotating coaxial cones, Experimental Fluid Mechanics 2016 Marienbad/TU Liberec,Czech Rupublic.
A. Boudis, O. Guerri, A. Benzaoui, and H. Oualli, “Simulation Numérique du Contrôle Actif par Jet Synthétique de L’écoulement Autour d’un Profil de Pale,” in 2nd International Conference on Aeronautical Sciences, ICAS, Oran, Algérie, 2015.
M. Maatar, M. Mekadem, T. Cettibi, H. Oualli, and A. Boudis, “Amélioration de l’extraction de l’énergie par les ailes battantes : Application aux éolienne,” in 2nd International Conference on Aeronautical Sciences, ICAS, Oran, Algérie, 2015.
Z.Tigrine, F.Mokhtari, A.Bouabdallah, A.Lalaoua, S.Lecheheb “Numerical analysis of liquid metal 17Li83Pb fluid MHD effects in rectangular duct using vortex generators”.8th International Conference on Electromagnetic Processing of Materials EPM, Cannes, France, 2015.
A. Merah, F.Mokhtari, A. Lalaoua, A. Bouabdallah, “Hydrodynamic instability of liquid metal flow in conical Taylor-Couette system”. 19ième International Couette-Taylor Workshop, Cottbus, Allemagne, 2015.
A.Merah, F.Mokhtari, A.Bouabdallah, E.Adnane, “3D numerical study of magnetohydrodynamic instability in liquid metal Taylor-Couette flow”, Topical Problems of Fluid Mechanics, Prague, Tcheque, 2015.
Y. Hamnoune, 19 th internationel Couette-Taylor Worshop(ICTW 19) Cottbus, Germany’ Free surface effect in Taylor-Dean flow system’.
M. Mahloul, A. Mahamdia et V. Sobolik (2015): «Transition to turbulence and relaminarization phenomena in the flow between two rotating spheres», Revue de Topical Problems of Fluid Mechanics.
7th International Exergy, Energy and Envirenement Symposium, IEEES7, (2015) :«Experimental Investigations of the Spherical Taylor-Couette Flow»/ Valenciennes, France.
Three–dimensional modeling of laser cutting process with compressible and incompressible assisting gas, T. Tamsaout , E.H. Amara and A. Bouabdallah, International Conference on Optics and Photonics Algeria (OPAL 2015), December 14-15,2015, Algiers, Algeria.
M. Maatar, M. Mekadem, A. Boudis, T. Cettibi, and H. Oualli, “Etude paramétrique et l’influence de la trajectoire sur les performances de l’extraction de l’énergie par les ailes battantes,” in The International Congress of Naval Aero-hydrodynamic, ICNH’14, Oran, Algérie, 2014.
A. Boudis, M. Mekadem, H. Oualli, A. Benzaoui, and O. Guerri, “Etude numérique de l’influence des paramètres de mouvement sur les performances aérodynamiques d’une aile battante,” in 2éme Conférence Internationale sur l’Energétique Appliquée et la Pollution, CIEAP, Constantine, Algérie, 2014.
F.Mokhtari, A.Merah, A.Bouabdallah, “3D Computations in MCZ silicon melt” 1st International Conference on Materials for Energy § Environmental Engineering-ICM3E’14, Algiers, Algeria, 2014.
F.Haddad, S.Zermout, F.Mokhtari, A.Benzaoui, “Influence of the Crucible Geometry on the Shape of the Melt-Crystal Interface during Growth by using a Heat Exchnager Method” 1st International Conference on Materials for Energy § Environmental Engineering-ICM3E’14, Algiers, Algeria, 2014.
S.Zermout, F.Haddad, F.Mokhtari, A.Merah, “CGSim Numerical Study of Kyropoulos crystal growth of sapphire” 1st International Conference on Materials for Energy § Environmental Engineering-ICM3E’14, Algiers, Algeria, 2014.
Z. Tigrine, F. Mokhtari, A. Bouabdallah, A. Lallaoua “Numerical modelling of MHD liquid metal 83 Pb-17Li and heat transfer in rectangular duct”. 7th International Scientific Colloquium Modelling for Electromagnetic Processing, Leibniz University of Hannover, Germany, 2014.
Z.Tigrine, F.Mokhtari, A.Bouabdallah, “Liquid metal flow and heat transfer in rectangular duct under the influence of axial magnetic fields”. 9th PAMIR International Conference Fundamental and Applied MHD Thermo acoustic and Space technologies Riga – Latvia, 2014.
F.Mokhtari, A.Merah, A.Bouabdallah, “Free surface study in silicon Czochralski melt” 6th international workshop on crystal growth technology, Berlin, Germany, 2014.
F.Mokhtari, A.Merah, A.Bouabdallah, “Free surface study in silicon Czochralski melt with rotating crucible” EMRS Spring Meeting, Lille, France, 2014.
A.Merah, F.Mokhtari, A.Bouabdallah, “Hydrodynamic and magnetohydrodynamic instabilities in silicon crystal growth” EMRS Spring Meeting, Lille, France, 2014.
F.Mokhtari, A.Merah, A.Bouabdallah, “3D Numerical investigation on silicon crystal growth” International Conference on Nanostructures for Sensing & Energy Conversion NaSEC’14, Algiers, Algeria, 2014.
F.Yahi, Y.Hamnoune, F.Mokhtari, S.Lecheheb , A.Bouabdallah,“Magnetic field effect on the onset of the helicoidal instability in conical Taylor-Couette flow system” The 7th International Symposium on Hydrocarbons and Chemistry, Boumerdes, Algeria, 2014.
Y. Hamnoune, Taylor-Dean instability in conical system, 2nd international Symposium on Multiphase Process Engineering –MMPE 2014 Hamburg.
